Grinder 115Mm Cut off Diamond Saw Blade 14 12 Inch
Grinder 115Mm Cut off Diamond
Saw Blade 14 12 Inch
| Out Diameter | Inner Hole(mm) | The dimension of teeth(mm) | ||
| inch | mm | Thickness | Height | |
| 4.3 | 110 | 16/20/22.23/25.4 | 1.6/1.7/1.8 | 7/10 |
| 4.5 | 115 | 16/20/22.23/25.4 | 1.6/1.7/1.8 | 7/10 |
| 5 | 125 | 16/20/22.23/25.4 | 1.8/2 | 7/10 |
| 6 | 150 | 16/20/22.23/25.4 | 1.8/2 | 7/10 |
| 7 | 180 | 16/20/22.23/25.4 | 2.2/2.4 | 7/10 |
| 8 | 200 | 16/20/22.23/25.4 | 2.4/2.6 | 7/10 |
| 9 | 230 | 16/20/22.23/25.4 | 2.4/2.6 | 7/10 |
a. To get the even and smooth slabFeatures:
b. To produce slabs in very short time
c. To have low- noise and friendly surroundings
d. Easy manipulation and with low cost
e. Always low power consume and lesser raw material waste
f.Flexibility,unlimited by the size of work piece,can be used for dressing and forming for abnormal profiles.
Attention when use:
1. Before saw blade installed, pollutions adhering between saw blade and flange shall be removed,when installing saw blade, the marked direction shall be kept consistent with the rotating direction of electric tools, and flange shall be fastened by spanner attached to electric tools
2. Do not use any saw blade that has been deformed for being pressed of crashed
3. When operating, operator must wear safety helmet, safety footwear and goggles, protective glove,additionally, if necessary operator must use earplug, mask and so on
4. Electric tools shall have protective cover.
